Looking for a cable with maximum signal transfer and incredibly wide bandwidth? Then the iFi Mercury3.0 is the cable you need.
Standard mass-produced cables normally have the signal and power cables compacted closely together. This hinders conductivity and often results in poor signal transfer.Not so with our snazzy, new-look Mercury3.0 cable.
The Mercury3.0 cable separates the audio signal from the power with quadruple shielding to eliminate interference and jitter. It employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer.The Mercury3.0 custom minimum inductance parallel type with quadruple-shielding. This offers even more protection from RFI and EMI noise than the original. Sound quality is not compromised as with many ‘off the shelf’ versions where inadequate shielding is commonplace. Critically, the whole design hardly has a 5% tolerance to the 90ohm impedance rule.
Construction: Minimu inductance parallel construction
Conductors: 24 and 28AWG
Conductor material: Heavy OFHC continuous cast copper silver matrix
Insulation: HD Polyethylene
Impedance: 90 Ohms (1% tolerance)
AC spark insulation : 1500V
Connectors: iFi ‘FINAL’ USB connectors
Insulation resistance: 100Mohm
Tensile strength: 1500PSI
Lengths/Weights: 0.5m/98g (0.22 lbs)
1.0m/115g (0.25 lbs)
Warranty period: 12 months